PFE notification: Getfail packets. The number of notification cells ignored because DMA (direct memory access) memory could not be allocated. The RMON_EVENT_pfe_getfail_notification message is logged each time the packet forwarding engine (pfe) is not able to allocate memory for notification cells. When an RMON_EVENT_pfe_getfail_notification event occurs, a message similar … [Read more...]
How to disable PFE inline PPP keepalive messages
This article outlines how to disable PFE inline PPP keepalive messages, periodic messages sent at predefined intervals to determine whether the underlying TCP connection is still up. Thanks to Release Line Item 6162 (RLI6162), the PFE can now handle client-initiated PPP LCP Echo Request/Reply packets. The PFE can now receive and process the client Echo Request and … [Read more...]
RTLOGD_LOG_READ_ERROR
The RTLOGD_LOG_READ_ERROR message is reported into the system message file whenever the J-series Services Router (JSR) log daemon fails to read JSR logs. This article documents an approach to troubleshoot this problem. This message is generated by the system log utility for real-time processing of packets for security control (rtlogd) on routers running the Junos software … [Read more...]
RTLOGD_LOG_BIND_ERROR
The RTLOGD_LOG_BIND_ERROR message is reported into the system message file whenever the J-series Services Router (JSR) log daemon fails to bind to the JSR log forwarder. This article documents an approach to troubleshoot this problem. This message is generated by the system log utility for real-time processing of packets for security control (rtlogd) on routers running the … [Read more...]
PFE: .*imq_stream_disable_stream.*
imq_stream_disable_stream() messages are logged when the router is unable to drain a queue within a specific period of time. This message is usually an indication of recovery from an issue, rather than an issue in and of itself. The problem related to this syslog message is described in the following sections: The imq_stream_disable_stream message is logged when an … [Read more...]
RMON_EVENT_pfe_illegal_notification
PFE notification: Illegal packets. The number of cell notifications dropped because the notification has an illegal notification type. The RMON_EVENT_pfe_illegal_notification message is logged each time the packet forwarding engine (pfe) illegal notification counter is incremented. When a RMON_EVENT_pfe_illegal_notification event occurs, a message similar to the following … [Read more...]
PFE:.*CCHIP: .*abnormal discard seen.*
PFE (Packet Forwarding Engine) board is reporting CCHIP abnormal discard errors. The PFE:.*CCHIP: .*abnormal discard seen.* message is seen when the C-chip is discarding packets abnormally. This chip is usually found on the forwarding fabric component of the router. The message will look similar to one of the following examples. CCHIP: abnormal discards seen - check … [Read more...]
CHASSISD_FASIC_INPUT_DROP
CHASSISD_FASIC_INPUT_DROP The Packet Forwarding Engine divides packets into smaller units, known as cells, for more efficient processing. As the indicated F-chip on the indicated Control Board (CB) processed data, which was received from the indicated Packet Forwarding Engine (PFE) on the indicated Flexible PIC Concentrator (FPC), it dropped the indicated number of cells per … [Read more...]
KERNEL: rdp retransmit error
The kernel on the controller (e.g., Routing Engine) is having difficulty communicating with the PFE (Packet Forwarding Engine). The problem related to this syslog message is described in the following sections: The KERNEL: rdp retransmit error message is logged whenever the kernel on the controller is having difficulty communicating with the Packet Forwarding Engine … [Read more...]
Juniper Clustering : Policy out of syn
Juniper SRX in a cluster, after re-ordering some security policies on the primary device and committing them , now can not make any other changes without the warning error: Policy is out of sync between RE and PFE cluster1.node1. Please resync before commit. error: configuration check-out failed. The out-of-sync can be due to: •A policy message from RE to PFE is … [Read more...]