CCNP Route Lab Manual with Solutions
Chapter 1
Chapter 2
- Lab 2-1, EIGRP Configuration, Bandwidth, and Adjacencies
- Lab 2-2, EIGRP Load Balancing
- Lab 2-3, EIGRP Summarization and Default Network Advertisement
- Lab 2-4, EIGRP Frame Relay Hub-and-spoke: Router Used as a Frame Reay Switch
- Lab 2-5, EIGRP Authentication and Timers
- Lab 2-6, EIGRP Challenge Lab
- Lab 2-7, Troubleshooting EIGRP
Chapter 3
- Lab 3-1, Single-Area OSPF Link Costs and Interface Priorities
- Lab 3-2, Mufti-Area OSPF with Stub Areas and Authentication
- Lab 3-3, OSPF Virtual Links and Area Summarization
- Lab 34, OSPF over Frame Reay
- Lab 3-5, OSPF Challenge Lab
- Lab 3-6, OSPF Troubleshooting Lab
- Lab 3-7, OSPF case study
Chapter 4
- Lab 4-1, Redistribution Between RIP and OSPF
- Lab 4-2, Redistribution Between EIGRP and OSPF
- Lab 4-3, Manipulating Administrative Distances
- Lab 4-4, EIGRP and OSPF case study
Chapter 5
- Lab 5-1, Configure and Verifi Path Control
- Lab 5-2, Configure IP SLA Tracking and Path Control
Chapter 6
- Lab 6-1, Configuring BGP with Default Routing
- Lab 6-2, Using the AS_PATH Attribute
- Lab 6-3, Configuring IBGP and EBGP Sessions, Local Preference, and MED
- Lab 6-4, BGP Route Reflectors and Route Fitters
- Lab 6-5, BGP case study
Chapter 7
Chapter 8
- Lab 8-1, Configuring OSPF for IPv6
- Lab 8-2, Using Manual IPv6 Tunnels wth EIGRP for IPv6
- Lab 8-3, Configuring 6to4 Tunnels
- Lab 8-4, IPv6 Challenge Lab
- Lab 8-5, IPv6 Troubleshooting Lab
More Resources