CCNA RSE Lab: 2.2.2.5 Configuring IPv4 Static and Default Routes Topology Addressing Table Device Interface IP Address Subnet Mask Default Gateway R1 G0/1 192.168.0.1 255.255.255.0 N/A S0/0/1 10.1.1.1 255.255.255.252 N/A R3 G0/1 … [Read more...]
CCNA RSE Lab: 10.3.1.11 Lab – Configure and Verify Password Recovery
CCNA RSE Lab: 10.3.1.11 Lab - Configure and Verify Password Recovery Topology Objectives Part 1: Configure Basic Device Settings Part 2: Reboot Router and Enter ROMMON Part 3: Reset Password and Save New Configuration Part 4: Verify the Router is Loading Correctly Background / Scenario The purpose of this lab is to reset the enable password on a specific Cisco … [Read more...]
CCNA RSE Lab: 2.2.4.5 Configuring IPv6 Static and Default Routes
CCNA RSE Lab: 2.2.4.5 Configuring IPv6 Static and Default Routes Topology Addressing Table Device Interface IPv6 Address / Prefix Length Default Gateway R1 G0/1 2001:DB8:ACAD:A::/64 eui-64 N/A S0/0/1 FC00::1/64 N/A R3 G0/1 2001:DB8:ACAD:B::/64 … [Read more...]
CCNA RSE Lab: 9.2.2.6 Configuring Dynamic and Static NAT
CCNA RSE 9.2.2.6 Lab - Configuring Dynamic and Static NAT Topology Addressing Table Objectives Part 1: Build the Network and Verify Connectivity Part 2: Configure and Verify Static NAT Part 3: Configure and Verify Dynamic NAT Background / Scenario Network Address Translation (NAT) is the process where a network device, such as a Cisco router, assigns a … [Read more...]
CCNA RSE 2.3 2.4 Lab – Troubleshooting Ipv4 and Ipv6 Static Routes
CCNA RSE 2.3 2.4 Lab – Troubleshooting Ipv4 and Ipv6 Static Routes CCNA 2 2.3 2.4 Lab - packet tracer troubleshooting ipv4 and ipv6 addressing Static Routes Answers Topology Troubleshooting Ipv4 and Ipv6 static routes Addressing Table Device Interface IP Address Default Gateway HQ G0/1 192.168.0.1/25 2001:DB8:ACAD::1/64 FE80::1 … [Read more...]
CCNA RSE Lab: 6.2.2.5 Configuring VLANs and Trunking
CCNA RSE Lab: 6.2.2.5 Configuring VLANs and Trunking 6.2.2.5 lab - configuring vlans and trunking answers Topology Addressing Table Device Interface IP Address Subnet Mask Default Gateway S1 VLAN 1 192.168.1.11 255.255.255.0 N/A S2 VLAN 1 192.168.1.12 255.255.255.0 N/A PC-A NIC 192.168.1 0.3 255.255.255.0 192.168.1 … [Read more...]
CCNA RSE Lab: 9.3.1.5 TroubIeshootin NAT Confìurations
CCNA RSE Lab: 9.3.1.5 TroubIeshootin NAT Confìurations Topology Addressing Table Objectives Part 1: Build the Network and Configure Basic Device Settings Part 2: Troubleshoot Static NAT Part 3: Troubleshoot Dynamic NAT Background / Scenario In this lab, the Gateway router was configured by an inexperienced network administrator at your company. Several … [Read more...]
CCNA RSE Lab: 8.2.4.4 Troubleshooting DHCPv6
CCNA RSE Lab: 8.2.4.4 Troubleshooting DHCPv6 Topology Addressing Table Device Interface IPv6 Address Prefix Length Default Gateway R1 G0/1 2001:DB8:ACAD:A::1 64 N/A S1 VLAN 1 Assigned by SLAAC 64 Assigned by SLAAC PC-A NIC Assigned by SLAAC and DHCPv6 64 Assigned by SLAAC Objectives Part 1: Build the Network and … [Read more...]
CCNA RSE Lab: 8.1.4.4 Troubleshooting DHCPv4
CCNA RSE Lab: 8.1.4.4 Troubleshooting DHCPv4 Topology Addressing Table Objectives Part 1: Build the Network and Configure Basic Device Settings Part 2: Troubleshoot DHCPv4 Issues Background / Scenario The Dynamic Host Configuration Protocol (DHCP) is a network protocol that lets the network administrators manage and automate the assignment of IP … [Read more...]
CCNA RSE Lab: 8.1.2.5 Configuring Basic DHCPv4 on a Switch
CCNA RSE Lab: 8.1.2.5 Configuring Basic DHCPv4 on a Switch Topology Addressing Table Device Interface IP Address Subnet Mask R1 G0/1 192.168.1.10 255.255.255.0 Lo0 209.165.200.225 255.255.255.224 S1 VLAN 1 192.168.1.1 255.255.255.0 VLAN 2 192.168.2.1 255.255.255.0 Objectives Part 1: Build the Network and Configure … [Read more...]