CCNP Route FAQ: OSPF Overview and Neighbor Relationships Figure: Typical Hierarchical OSPF Design Q1. A router has been configured with the commands router ospf 9, network 172.16.1.0 0.0.0.255 area 8, and network 172.16.0.0 0.0.255.255 area 9, in that order. No other OSPF-related commands have been configured. The answers list the IP addresses that could be assigned to this … [Read more...]
CCNP Route FAQ: EIGRP Route Summarization and Filtering
CCNP Route FAQ: EIGRP Route Summarization and Filtering Figure: Choosing Locations for Route Summarization Q1. Router R1 has been configured for EIGRP. The configuration also includes an ACL with one line–access-list 1 permit 10.100.32.0 0.0.15.255–and the EIGRP configuration includes the distribute-list 1 in command. Which of the following routes could not be displayed … [Read more...]
CCNP Route FAQ: EIGRP Topology, Routes, and Convergence
CCNP Route FAQ: EIGRP Topology, Routes, and Convergence Q1. Which of the following are methods EIGRP uses to initially populate (seed) its EIGRP topology table, before learning topology data from neighbors? (Choose two.) a. By adding all subnets listed by the show ip route connected command b. By adding the subnets of working interfaces over which static neighbors have been … [Read more...]
CCNP Route FAQ: EIGRP Overview and Neighbor Relationships
CCNP Route FAQ: EIGRP Overview and Neighbor Relationships Q1. A router has been configured with the commands router eigrp 9 and network 172.16.1.0 0.0.0.255. No other EIGRP-related commands have been configured. The answers list the IP addresses that could be assigned to this router’s Fa0/0 interface. Which answers list an IP address/prefix length that would cause the router … [Read more...]
CCNP Route FAQ: OSPF Virtual Links and Frame Reay Operations
CCNP Route FAQ: OSPF Virtual Links and Frame Reay Operations Figure: Connecting Two Area 0s with a Virtual Link Q1. Which of the following answers can be verified as true based on the following command output from Router R1? R1#show ip ospf virtual-links Virtual Link OSPF_VL0 to router 4.4.4.4 is up Run as demand circuit DoNotAge LSA allowed. Transit area 1, via … [Read more...]