This article describes the issue of certain e-mails not going through the device and eventually being timed out, when UTM is enabled on SRX branch and J-series devices. Certain e-mails are not going through the device and are eventually timed out, when UTM is enabled on SRX branch and J-series devices. Currently, the UTM module on Branch SRX/J-series devices does not … [Read more...]
Import routes from the default routing table into other routing instance tables using policies
This article describes the procedure for importing all the routes of a default routing table, inet.0, into the routing instances on SRX and J Series devices. The Problem: When a term is added in the routing-policy and is specified with a from-condition, it does not give the instance name to import from: [edit] # set policy-options policy-statement … [Read more...]
ISP Failover: Configure J-Series/SRX for dual ISP without dynamic routing protocols
This article contains a sample configuration for J-Series and SRX Branch with dual ISP connection. This will allow for ISP failover without dynamic routing protocols such as OSPF or BGP. Topology Assumptions Trust zone network is 192.168.1.0/24 on ge-0/0/0 DMZ zone network is 10.10.10.0/24 on ge-0/0/1 ISP1 zone network is 1.1.1.0/29 on fe-0/0/6 ISP2 zone network is … [Read more...]