Bidirectional Forwarding Detection (BFD) fails to establish a session when the transmit/receive hello intervals are set at very low values on traffic that is evaluated by a service-set. This article explains how to configure the firewall filter to skip the BFD packets from being evaluated by the service-set. If the BFD traffic does not have to be NAT'd, we can create a … [Read more...]
Sample NAT44 configuration for PPPoE subscribers
This article provides information about a sample working configuration for CGNAT (NAT44). Information about a sample working configuration for CGNAT (NAT44). The configuration is as follows: dynamic-profiles { pppoe1 { interfaces { pp0 { unit "$junos-interface-unit" { ppp-options { … [Read more...]