This article explains why the control link SFP is not shown in show chassis hardware, when SRX1400 is in a cluster.
When the show chassiss hardware command is executed, the output will be:
SRX1400 not in cluster, sfp 10 and 11 on fpc 0 are shown.
root> show chassis hardware
Hardware inventory:
Item Version Part number Serial number Description
Chassis BH5210AA0001 SRX 1400
...
FPC 0 REV 10 750-032536 AACY1412 SRX1k 10GE SYSIO
PIC 0 BUILTIN BUILTIN 6x 1GE RJ45 3x 1GE SFP 3x 10GE SFP+
Xcvr 6 0 NON-JNPR 0404281250597092 SFP-SX
Xcvr 8 REV 01 740-021308 T09F39737 SFP+-10G-SR
Xcvr 10 REV 02 740-011613 PG136JT SFP-SX
Xcvr 11 REV 01 740-011613 PE725KE SFP-SX
...
SRX1400 in cluster, sfp 10 and 11 on fpc 0 are NOT shown. Following logs are in messages:
root@SRX1400-a> show chassis hardware
...
node1:
--------------------------------------------------------------------------
Hardware inventory:
Item Version Part number Serial number Description
Chassis BH5210AA0001 SRX 1400
...
FPC 0 REV 10 750-032536 AACY1412 SRX1k 10GE SYSIO
PIC 0 BUILTIN BUILTIN 6x 1GE RJ45 3x 1GE SFP 3x 10GE SFP+
Xcvr 6 0 NON-JNPR 0404281250597092 SFP-SX
Xcvr 8 REV 01 740-021308 T09F39737 SFP+-10G-SR
...
Apr 19 09:49:23 SRX1400-b node1.cpp0 IOC(0/0)(10), SFP 5: in sfp_read_range, failed to read SFP EEPROM address 0
Apr 19 09:49:23 SRX1400-b node1.cpp0 IOC(0/0)(11), SFP 6: in sfp_read_range, failed to read SFP EEPROM address 0
This is the correct expected behavior, no need for any correction.