Verifying Static and Default Routes The best way to verify a static or default route configuration is by checking that the route is evident in the routing table. The command to view the IP routing table is show ip route. If you want to see the routing entry for a specific network, you can append that subnet to the show ip route command (for example, show ip route … [Read more...]
How to achieve redundancy using Dynamic Routing Protocols on an Individual Physical Interface in an SRX Chassis Cluster Environment
This article shows how to resume traffic during a failover in a chassis cluster environment when individual interfaces (xe or ge or fe) are used instead of standard cluster interfaces (reth). The problem is shown in the topology below. It is based on the following assumptions: The L-3 links on Router 1 and 3 are terminated on node0 only. The L-3 links on Router 2 and … [Read more...]