The chassis process (chassisd), which controls hardware components on the routing platform, could not configure high speed links (HSL) for the indicated F chip on the indicated Control Board (CB). The CHASSISD_FASIC_HSL_CONFIG_ERROR message is logged each time the chassis process is unable to configure an F chip high speed link. When a CHASSISD_FASIC_HSL_CONFIG_ERROR … [Read more...]
DH_SVC_RTSOCK_OPEN_FAILURE
The Dynamic Host Configuration Protocol (DHCP) services process (dhcp-service) could not successfully open a routing socket to the kernel. The error string accompanying this log entry indicates the specific error. The problem related to this syslog message is described in the following sections: An error similar to the following is reported: DH_SVC_RTSOCK_OPEN_FAILURE: … [Read more...]
CHASSISD_FM_ERROR_F13_FB_RX_VC
In a Tx-Plus routing matrix, packets traverse both electrical and optical media as they travel between the Switch Interface Boards (SIBs) in the T1600 routing nodes (called ST-SIB-Ls) and the SIBs in the TX Matrix Plus platform (called F13SIBs and F2S-SIBs). The chassis process (chassisd) on the routing node that houses the indicated F13SIB detected the indicated error as … [Read more...]
CHASSISD_FASIC_SRAM_ERROR
The chassis process (chassisd), which controls hardware components on the routing platform, detected that SRAM (static random access memory) failed to initialize for the indicated F chip on the indicated Control Board (CB). The CHASSISD_FASIC_SRAM_ERROR message is logged each time the chassis process fails to initialize the SRAM on an F chip installed on a control … [Read more...]
CHASSISD_MAC_ADDRESS_FABRIC_ERR
The chassis process (chassisd) could not obtain a media access control (MAC) address for the indicated fabric interface because of an internal error. When a MAC address initialization failed for a fabric interface, it writes a message similar to the following: CHASSISD_MAC_ADDRESS_FABRIC_ERR: Unable to allocate MAC address for fabric interface <device-id> A failure … [Read more...]
CHASSISD_FM_ERROR_F13_FB_HSR_TXP
In a Tx-Plus routing matrix, packets traverse both electrical and optical media as they travel between the Switch Interface Boards (SIBs) in the T1600 routing nodes (called ST-SIB-Ls) and the SIBs in the TX Matrix Plus platform (called F13SIBs and F2S-SIBs). The chassis process (chassisd) on the routing node that houses the indicated F13SIB detected an error in the electrical … [Read more...]
CHASSISD_SIB_INVALID_SLOT
The chassis process (chassisd), which controls hardware components on the routing platform, detected the presence of a Switch Interface Board (SIB) in an invalid slot. The SIB remains offline. The problem related to this syslog message is described in the following sections: The CHASSISD_SIB_INVALID_SLOT message is logged each time the chassis process detects a SIB board … [Read more...]
CHASSISD_IFDEV_GET_BY_NAME_FAIL
The chassis process (chassisd) could not obtain information about the indicated interface device. When a CHASSISD_IFDEV_GET_BY_NAME_FAIL event occurs, a message similar to the following is reported: chassisd[1623]: CHASSISD_IFDEV_GET_BY_NAME_FAIL: Unable to retrieve information for interface device et-1/1/3: Cannot allocate memory chassisd[1319]: … [Read more...]
Generate a process application core-dump for debugging purposes
On a UNIX platform (Like Juniper devices) if a process is hung or having issues it is possible to force the application to write the memory image; known as a core dump. This core dump can then later be analyzed by Juniper Technical Assistance Center (JTAC) to determine a possible root cause of the hang or a possible bug or software issue A process application (like pfed, … [Read more...]
CHASSISD_FASIC_OUTPUT_DROP
CHASSISD_FASIC_OUTPUT_DROP The message is generated by the chassis process (chassisd), which controls hardware components on the routing platform. The Packet Forwarding Engine divides packets into smaller units called cells for more efficient processing. As the indicated F chip on the indicated Control Board (CB) processed data before sending it to the indicated Packet … [Read more...]