CCNA 4 Chapter 3 SIC PPP, Routing, and Remote Access VPN – PT Skills Assessment

CCNA 4 Chapter 3 SIC PPP, Routing, and Remote Access VPN – PT Skills Assessment

CCNA Routing and Switching Connecting Networks

Chapter 3 SIC: PPP, Routing, and Remote Access VPN

FORM 0

ccna-4-chapter-3-sic-ppp-routing-remote-access-vpn-pt-skills-assessment-1
A few things to keep in mind while completing this activity:

  1. Do not use the browser Backbutton or close or reload any Exam windows during the exam.
  2. Do not close Packet Tracer when you are done. It will close automatically.
  3. Click the Submit Assessmentbutton to submit your work.

Addressing Table

ccna-4-chapter-3-sic-ppp-routing-remote-access-vpn-pt-skills-assessment-2
Note: All device console passwords are cisco. All device enable passwords are class.

Step 1 Configure HDLC on router Secure.

Configure the WAN link from router Secure to ISP_1  using HDLC encapsulation.

Step 2 Configure PPP to connect HQ to ISP_1.

Configure the WAN link from router HQ to ISP_1  using PPP encapsulation and CHAP authentication.

  • Create a user ISP_1 with the password of cisco123.

Step 3 Configure eBGP routing.

a.  Configure router HQ with eBGP routing.

  • Configure HQ to peer with ISP_1.
  • Add only HQ 10.1.1.0/24 internal network to BGP.

b.  Configure router Branch with eBGP routing.

  • Configure Branch to peer with ISP_1.
  • Add the Branch internal network to BGP

Step 4 Configure GRE Tunneling.

a.  Configure router HQ with a tunnel interface to send IP traffic over GRE to Branch.

  • Configure Tunnel 1 with appropriate addressing information.
  • Configure the tunnel source with the local exit interface.
  • Configure the tunnel destination with the appropriate endpoint IP address.

b.  Configure router Branch with a tunnel interface to send IP traffic over GRE to HQ.

  • Configure Tunnel 1 with appropriate addressing information.
  • Configure the tunnel source with the local exit interface.
  • Configure the tunnel destination with the appropriate endpoint IP address.

Step 5 Configure OSPF Routing.

The Branch LAN must have connectivity to the HQ LAN. Configure OSPF across the GRE tunnel.

  • Configure OSPF process 10 on the Branch router.
  • Backup should advertise the LAN network via OSPF.
  • Backup should be configured to form an adjacency HQ over the GRE tunnel.
  • Disable OSPF updates on appropriate interface(s).

Step 6 Configure OSPF Routing.

The HQ LAN must have connectivity to the Branch LAN. Configure OSPF across the GRE tunnel.

  • Configure OSPF process 10 on the HQ router.
  • HQ should advertise both LAN networks via OSPF.
  • HQ should be configured to form an adjacency with Branch over the GRE tunnel.
  • Disable OSPF updates on appropriate interface(s).

Step 7 Connectivity.

  • Verify full connectivity from Main_PC1 to the Web_Server in the Secure network.
  • Verify full connectivity from Teleworker1 to Web_Server in the Secure network.

 Answers:

Secure / Storage / OffSite Router

HQ / Corp / Main Router

Branch / Remote / Backup

FORM 1

ccna-4-chapter-3-sic-ppp-routing-remote-access-vpn-pt-skills-assessment-3

A few things to keep in mind while completing this activity:

  1. Do not use the browser Backbutton or close or reload any Exam windows during the exam.
  2. Do not close Packet Tracer when you are done. It will close automatically.
  3. Click the Submit Assessmentbutton to submit your work.

Addressing Table

ccna-4-chapter-3-sic-ppp-routing-remote-access-vpn-pt-skills-assessment-4

Note: All device console passwords are cisco. All device enable passwords are class.

Step 1 Configure HDLC on router Storage.

Configure the WAN link from router Storage to ISP_1  using HDLC encapsulation.

Step 2 Configure PPP to connect Corp to ISP_1.

Configure the WAN link from router Corp to ISP_1  using PPP encapsulation and CHAP authentication.

  • Create a user ISP_1 with the password of cisco123.

Step 3 Configure eBGP routing.

a.  Configure router Corp with eBGP routing.

  • Configure Corp to peer with ISP_1.
  • Add only Corp 10.1.1.0/24 internal network to BGP.

b.  Configure router Remote with eBGP routing.

  • Configure Remote to peer with ISP_1.
  • Add the Remote internal network to BGP

Step 4 Configure GRE Tunneling.

a.  Configure router Corp with a tunnel interface to send IP traffic over GRE to Remote.

  • Configure Tunnel 1 with appropriate addressing information.
  • Configure the tunnel source with the local exit interface.
  • Configure the tunnel destination with the appropriate endpoint IP address.

b.  Configure router Remote with a tunnel interface to send IP traffic over GRE to Corp.

  • Configure Tunnel 1 with appropriate addressing information.
  • Configure the tunnel source with the local exit interface.
  • Configure the tunnel destination with the appropriate endpoint IP address.

Step 5 Configure OSPF Routing.

The Remote LAN must have connectivity to the Corp LAN. Configure OSPF across the GRE tunnel.

  • Configure OSPF process 10 on the Remote router.
  • Backup should advertise the LAN network via OSPF.
  • Backup should be configured to form an adjacency Corp over the GRE tunnel.
  • Disable OSPF updates on appropriate interface(s).

Step 6 Configure OSPF Routing.

The Corp LAN must have connectivity to the Remote LAN. Configure OSPF across the GRE tunnel.

  • Configure OSPF process 10 on the Corp router.
  • Corp should advertise both LAN networks via OSPF.
  • Corp should be configured to form an adjacency with Remote over the GRE tunnel.
  • Disable OSPF updates on appropriate interface(s).

Step 7 Connectivity.a.  Verify full connectivity from Main_PC1 to the Web_Server in the Storage network.
b.  Verify full connectivity from Teleworker1 to Web_Server in the Storage network.

Answers:

Secure / Storage / OffSite Router

HQ / Corp / Main Router

Branch / Remote / Backup

FORM 2

ccna-4-chapter-3-sic-ppp-routing-remote-access-vpn-pt-skills-assessment-5

A few things to keep in mind while completing this activity:

  1. Do not use the browser Backbutton or close or reload any Exam windows during the exam.
  2. Do not close Packet Tracer when you are done. It will close automatically.
  3. Click the Submit Assessmentbutton to submit your work.

Addressing Table

ccna-4-chapter-3-sic-ppp-routing-remote-access-vpn-pt-skills-assessment-6

Note: All device console passwords are cisco. All device enable passwords are class.

Step 1 Configure HDLC on router OffSite.

Configure the WAN link from router OffSite to ISP_1  using HDLC encapsulation.

Step 2 Configure PPP to connect Main to ISP_1.

Configure the WAN link from router Main to ISP_1  using PPP encapsulation and CHAP authentication.

  • Create a user ISP_1 with the password of cisco123.

Step 3 Configure eBGP routing.

a.  Configure router Main with eBGP routing.

  • Configure Main to peer with ISP_1.
  • Add only Main 10.1.1.0/24 internal network to BGP.

b.  Configure router Backup with eBGP routing.

  • Configure Backup to peer with ISP_1.
  • Add the Backup internal network to BGP

Step 4 Configure GRE Tunneling.

a.  Configure router Main with a tunnel interface to send IP traffic over GRE to Backup.

  • Configure Tunnel 1 with appropriate addressing information.
  • Configure the tunnel source with the local exit interface.
  • Configure the tunnel destination with the appropriate endpoint IP address.

b.  Configure router Backup with a tunnel interface to send IP traffic over GRE to Main.

  • Configure Tunnel 1 with appropriate addressing information.
  • Configure the tunnel source with the local exit interface.
  • Configure the tunnel destination with the appropriate endpoint IP address.

Step 5 Configure OSPF Routing.The Backup LAN must have connectivity to the Main LAN. Configure OSPF across the GRE tunnel.

  • Configure OSPF process 10 on the Backup router.
  • Backup should advertise the LAN network via OSPF.
  • Backup should be configured to form an adjacency Main over the GRE tunnel.
  • Disable OSPF updates on appropriate interface(s).

Step 6 Configure OSPF Routing.

The Main LAN must have connectivity to the Backup LAN. Configure OSPF across the GRE tunnel.

  • Configure OSPF process 10 on the Main router.
  • Main should advertise both LAN networks via OSPF.
  • Main should be configured to form an adjacency with Backup over the GRE tunnel.
  • Disable OSPF updates on appropriate interface(s).

Step 7 Connectivity.

  • Verify full connectivity from Main_PC1 to the Web_Server in the OffSite network.
  • Verify full connectivity from Teleworker1 to Web_Server in the OffSite network.

 Answers:

Secure / Storage / OffSite Router

HQ / Corp / Main Router

Branch / Remote / Backup

About the author

James Palmer

Leave a Comment